ISmart I3G Plus Flash File Firmware Stock Rom MT6572 4.4.2
iSmart i3G Plus Flash File Firmware Stock Rom MT6572 4.4.2
If you are looking for a way to flash your iSmart i3G Plus smartphone, you have come to the right place. In this article, we will show you how to download and install the flash file, firmware, and stock ROM for your device. This will help you to fix any software issues, such as bootloop, hang on logo, dead recovery, or virus infection.
Before you proceed, please make sure that you have a backup of your important data, as flashing will erase everything on your phone. Also, ensure that your battery is charged at least 50% to avoid any interruption during the process. You will need a computer, a USB cable, and some tools to flash your phone.
What is a Flash File?
A flash file is a file that contains the operating system and other software components of a smartphone. It is also known as firmware or stock ROM. Flashing means writing the flash file to the internal memory of the phone using a special software tool. This can be done to upgrade or downgrade the software version, or to fix any software problems.
What is MT6572?
MT6572 is a chipset model that is used in many low-end Android smartphones. It is a dual-core processor that supports 3G network and runs on Android 4.4.2 KitKat operating system. The iSmart i3G Plus is one of the devices that use this chipset.
How to Download iSmart i3G Plus Flash File?
To download the flash file for your iSmart i3G Plus, you can use the link below. This file is compatible with the MT6572 chipset and has the Android 4.4.2 KitKat version. The file size is about 500 MB and it is in zip format.
How to Install iSmart i3G Plus Flash File?
To install the flash file on your iSmart i3G Plus, you will need a software tool called SP Flash Tool. This tool can flash any MediaTek device using a scatter file. A scatter file is a text file that contains the information about the partitions and memory blocks of the device.
Here are the steps to install the flash file on your iSmart i3G Plus:
Download and extract the SP Flash Tool from this link:
Download and install the MediaTek USB VCOM drivers from this link:
Extract the iSmart i3G Plus flash file that you downloaded earlier and locate the scatter file inside it.
Run the SP Flash Tool as administrator and click on the Scatter-loading button.
Browse and select the scatter file from the extracted folder.
The tool will load all the files and show them in a list.
Make sure that all the files are checked and click on the Download button.
Turn off your phone and remove the battery (if removable).
Connect your phone to the computer using a USB cable while holding the Volume Down or Volume Up button (depending on your device).
The tool will detect your phone and start flashing it.
Wait for the process to complete and do not disconnect or interrupt it.
When the flashing is done, you will see a green tick mark on the screen.
Disconnect your phone and insert the battery (if removed).
Turn on your phone and enjoy the new firmware.
Congratulations! You have successfully flashed your iSmart i3G Plus with the latest flash file, firmware, and stock ROM. If you have any questions or problems, please leave a comment below.